This page does not review anything HiBy makes. It counts one thing: how much of what this database says about their products came out of their own documents, and how much had to be worked out or left blank.
| Product | Into 32Ω | Output impedance | Output noise |
|---|---|---|---|
| HiBy FC4 | 110 mW | not published | 1.7 µV |
| HiBy W5 | 80 mW | not published | not published |
| HiBy R6 Pro II | 750 mW | 0.6 Ω unverified | 4 µV unverified |
| HiBy RS6 | 180 mW | 0.4 Ω | not published |
| HiBy R8 II | 225 mW | 1 Ω | 3.2 µV |
Power decides whether it gets loud enough, output impedance decides whether it tilts the response of a multi-driver in-ear, and the noise figure decides whether you hear hiss with sensitive ones. All three fit on one line of a spec sheet; most of the industry prints one of them.
HiBy publishes a power figure at a stated load on 4 of 5, output impedance on 2, a noise figure on 2. Of the 20 power figures this site displays for them at 32, 150, 300 and 600 Ω: 4 printed by HiBy at that exact load, 12 worked out by holding output voltage steady across loads, 4 not traceable to any document of theirs. 1 of their entries here predate the sourcing rule and carry figures from independent measurement rather than from a document; those are marked unverified above and counted as unpublished.
Rather less than half of what this site says about HiBy came from them. The rest is arithmetic, and it is marked as arithmetic on every page.
The rule used here is the same for every maker and is described on the manufacturer index. Every figure behind it can be opened on the product page it came from, with the document it came from linked.