This page does not review anything Shanling makes. It counts one thing: how much of what this database says about their products came out of their own documents, and how much had to be worked out or left blank.
| Product | Into 32Ω | Output impedance | Output noise |
|---|---|---|---|
| Shanling H2 | 680 mW | not published | not published |
| Shanling UP5 | 112 mW | 0.6 Ω | 4 µV |
| Shanling UP6 | 626 mW | not published | not published |
| Shanling M1 Plus | 195 mW | 0.6 Ω | not published |
| Shanling UA5 | 137 mW | 0.8 Ω | 3.5 µV |
| Shanling H5 | 227 mW | 4.7 Ω | not published |
| Shanling M3 Ultra | 140 mW | 1 Ω | not published |
| Shanling H7 | 450 mW | 1.0 Ω | 1.5 µV |
| Shanling M6 Ultra | 240 mW | 1.0 Ω | not published |
| Shanling M7 | 406 mW | 1.0 Ω | 1.6 µV |
| Shanling M9 Plus | 520 mW | 1 Ω | not published |
Power decides whether it gets loud enough, output impedance decides whether it tilts the response of a multi-driver in-ear, and the noise figure decides whether you hear hiss with sensitive ones. All three fit on one line of a spec sheet; most of the industry prints one of them.
Shanling publishes a power figure at a stated load on 11 of 11, output impedance on 9, a noise figure on 4. Of the 44 power figures this site displays for them at 32, 150, 300 and 600 Ω: 11 printed by Shanling at that exact load, 33 worked out by holding output voltage steady across loads.
Most of what this site says about Shanling came from them, with the rest derived and labelled as derived.
The rule used here is the same for every maker and is described on the manufacturer index. Every figure behind it can be opened on the product page it came from, with the document it came from linked.