The Meze Elite is 32Ω at 101.0 dB/mW; the Meze STRADA is 40Ω at 111.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Elite needs 10.0 dB more than the STRADA to reach the same loudness — 0.79 mW against 0.08 mW.
| Specification | Elite | STRADA |
|---|---|---|
| Impedance | 32 Ω | 40 Ω |
| Sensitivity | 101.0 dB/mW | 111.0 dB/mW |
| Sensitivity (voltage) | 115.9 dB/V | 125.0 dB/V |
| Power for 100 dB | 0.79 mW | 0.08 mW |
| Voltage for 100 dB | 0.16 V | 56 mV |
| Current for 100 dB | 5.0 mA | 1.4 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.00 Ω | 5.00 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
1 source is low enough in output impedance for the STRADA under the one-eighth rule but not for the Elite (Shanling H5).
8 sources stay below the audible-hiss threshold with the Elite but cross it with the STRADA (FiiO BTR11, FiiO K11 R2R, Lake People G103-S Mk II, 5 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Meze Elite and Meze STRADA. Every figure on this page comes from what Meze published, or is derived from it — what that maker publishes, counted.