The HiFiMAN Jade II is an electrostatic headphone. It does not connect to a normal headphone output at all — it needs a dedicated energiser that supplies a high bias voltage, so every power figure on the rest of this site is irrelevant to it. No dongle, amplifier or player will drive it, whatever its wattage.
That is the whole answer, and it is worth stating plainly because "how many milliwatts do I need" is the wrong question here. What you need is a matching energiser from the same ecosystem.
Electrostatic specifications are quoted differently and are not comparable to dynamic or planar headphones. They are listed here only so the database is complete.
HiFiMAN publishes no sensitivity figure for this model.
Source: hifiman.com, hifiman.com.
| As it is labelled | As printed | Tolerance | Standard |
|---|---|---|---|
| Frequency Response | 7Hz-90kHz | not printed | not printed |
HiFiMAN prints 7Hz-90kHz for the HiFiMAN Jade II, under the heading “Frequency Response”. Source: hifiman.com.
No tolerance is printed with it, and that is the whole problem. “7Hz-90kHz” says nothing about how loud this headphone actually is at 7 Hz: it could be thirty decibels down there and the sentence would still be true. A range only means something with a ±dB figure beside it, and of the 490 models whose maker prints a range, 58 print that figure.
What these numbers are worth, maker by maker, is set out in the frequency response audit. No measurement is published here — only what the maker printed.
200Ω · — · Moderate
See requirements →200Ω · — · Moderate
See requirements →200Ω · — · Moderate
See requirements →Or open the comparison tool to put any two models side by side, or browse all 578. Or see every HiFiMAN headphone in the database, and how much of what this site says about them came from HiFiMAN’s own documents.