On power: 44 of the 51 USB dongles here reach 100 dB SPL on the Sennheiser HD 600. It needs 6.6 mW at its 300Ω, and 7 of them do not get there.
Power is one of three questions and the one that goes wrong least often. The other two — whether the source’s output impedance leaves the frequency response alone, and whether you will hear its noise floor — are answered further down, separately, because a source can pass one and fail another.
The 7 that fall short are Apple USB-C dongle (US), Apple USB-C dongle (EU), JadeAudio JA11, FiiO SnowSky Tiny A, 3 more. The closest of them, the FiiO KA13, delivers 5.0 mW into 300Ω against the 6.6 mW needed — 1.2 dB short.
The cheapest one that does reach it is the Generic CX31993 dongles at $12, which delivers 9.0 mW into 300Ω — 1 dB of headroom over the 6.6 mW this headphone needs for 100 dB SPL.
100 dB SPL is a peak level, not a listening level. If you listen at 85 dB the same headphone needs 0.21 mW, which is 15 dB less, and the answer above changes for most of the category. The model page has the full ladder.
Under the one-eighth rule the Sennheiser HD 600 wants a source below 37.50Ω. Of the 18 USB dongles here that publish an output impedance, 18 are under it and 0 are not.
The other 33 publish nothing at all on this, so they are not on either side of that count. This site leaves them blank rather than assuming a figure.
Hiss depends on the source’s own noise floor and on how sensitive the headphone is. At 91.8 dB/mW and 300Ω, the Sennheiser HD 600 turns one microvolt of source noise into about -23 dB SPL — and the threshold where that stops being noticeable in a quiet room is around 20 dB SPL.
Of the 16 USB dongles here that publish a noise figure, 16 stay below that threshold with this headphone and 0 cross it.
The remaining 35 publish no noise figure, so they cannot be placed on either side.
| Source | Price | Into 300Ω | Output impedance | Hiss in these | Power verdict |
|---|---|---|---|---|---|
| FiiO KA11 | $29 | 22 mW | 0.7 Ω | -18 dB SPL | Enough |
| ddHiFi TC35AL | $46 | 22 mW | not published | not published | Enough |
| ddHiFi TC35Air | $46 | 22 mW | not published | not published | Enough |
| iFi GO link | $59 | 14 mW | 0.4 Ω | not published | Enough |
| Tempotec Sonata BHD Pro | $60 | 30 mW | not published | not published | Enough |
| Tanchjim Space | $70 | 13 mW | not published | -22 dB SPL | Enough |
| Truthear SHIO | $70 | 13 mW | not published | -19 dB SPL | Enough |
| Moondrop Dawn Pro | $75 | 13 mW | not published | -19 dB SPL | Enough |
| FiiO KA3 | $79 | 14 mW | 0.5 Ω | -18 dB SPL | Enough |
| FiiO KA5 | $99 | 14 mW | 0.3 Ω | -19 dB SPL | Enough |
| ddHiFi TC44 Pro E2 | $99 | 27 mW | not published | not published | Enough |
| FiiO KA15 | $109 | 19 mW | 0.8 Ω | -18 dB SPL | Enough |
Sorted by how many of the three questions the source answers well, then by price. A blank in a column is a blank in the manufacturer’s own documentation, not a zero.
The Sennheiser HD 600 on other categories: Bluetooth receivers · portable players · desktop amplifiers · desktop DAC/amps · audio interfaces.
The Sennheiser HD 600 page has every source in the database against this headphone, and the matcher takes your own numbers.