The AKG K371 is 32Ω at 99.1 dB/mW; the HiFiMAN Susvara is 60Ω at 83.0 dB (no reference unit printed). This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The HiFiMAN Susvara needs 16.1 dB more than the AKG K371 to reach the same loudness — 50 mW against 1.2 mW.
| Specification | AKG K371 | HiFiMAN Susvara |
|---|---|---|
| Impedance | 32 Ω | 60 Ω |
| Sensitivity | 99.1 dB/mW | 83.0 dB |
| Sensitivity (voltage) | 114.0 dB/V | 95.2 dB/V |
| Power for 100 dB | 1.2 mW | 50 mW |
| Voltage for 100 dB | 0.20 V | 1.73 V |
| Current for 100 dB | 6.2 mA | 28.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.00 Ω | 7.50 Ω |
| Sources that reach 100 dB out of 280 | 280 | 231 |
One caution before reading the rows. HiFiMAN Susvara printed a decibel figure with no reference unit, so this page reads it as per milliwatt. If it is really per volt, that model needs far more than the table says. Why the two readings differ by so much.
49 of the 280 sources have the power for the AKG K371 but not for the HiFiMAN Susvara — Apple USB-C dongle (US), Apple USB-C dongle (EU), Generic CX31993 dongles, 46 more.
1 source is low enough in output impedance for the HiFiMAN Susvara under the one-eighth rule but not for the AKG K371 (Shanling H5).
231 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: AKG K371 and HiFiMAN Susvara. Each figure on this page is labelled on those pages with where it came from, including the ones AKG and HiFiMAN never published — what AKG publishes and what HiFiMAN publishes, both counted.