The Beyerdynamic Amiron Home is 250Ω at 102.0 dB/mW; the Beyerdynamic DT 880 Edition (600Ω) is 600Ω at 96.0 dB (no reference unit printed). This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The DT 880 Edition (600Ω) needs 6.0 dB more than the Amiron Home to reach the same loudness — 2.5 mW against 0.63 mW.
| Specification | Amiron Home | DT 880 Edition (600Ω) |
|---|---|---|
| Impedance | 250 Ω | 600 Ω |
| Sensitivity | 102.0 dB/mW | 96.0 dB |
| Sensitivity (voltage) | 108.0 dB/V | 98.2 dB/V |
| Power for 100 dB | 0.63 mW | 2.5 mW |
| Voltage for 100 dB | 0.40 V | 1.23 V |
| Current for 100 dB | 1.6 mA | 2.0 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 31.25 Ω | 75.00 Ω |
| Sources that reach 100 dB out of 280 | 280 | 266 |
One caution before reading the rows. Beyerdynamic DT 880 Edition (600Ω) printed a decibel figure with no reference unit, so this page reads it as per milliwatt. If it is really per volt, that model needs far more than the table says. Why the two readings differ by so much.
14 of the 280 sources have the power for the Amiron Home but not for the DT 880 Edition (600Ω) — Apple USB-C dongle (US), Apple USB-C dongle (EU), JadeAudio JA11, 11 more.
15 sources are low enough in output impedance for the DT 880 Edition (600Ω) under the one-eighth rule but not for the Amiron Home (Audient EVO 4, ART HeadAmp 4 Pro, Focusrite Scarlett Solo 4th gen, 12 more).
266 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Beyerdynamic Amiron Home and Beyerdynamic DT 880 Edition (600Ω). Each figure on this page is labelled on those pages with where it came from, including the ones Beyerdynamic never published — what that maker publishes, counted.