The Campfire Audio Andromeda 10 is 8.5Ω at 111.6 dB/mW; the Campfire Audio Solaris 2020 is 15Ω at 94.0 dB (no figure from the maker at all). This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Solaris 2020 needs 17.6 dB more than the Andromeda 10 to reach the same loudness — 4.0 mW against 0.07 mW.
| Specification | Andromeda 10 | Solaris 2020 |
|---|---|---|
| Impedance | 8.5 Ω | 15 Ω |
| Sensitivity | 111.6 dB/mW | 94.0 dB |
| Sensitivity (voltage) | 132.3 dB/V | 112.2 dB/V |
| Power for 100 dB | 0.07 mW | 4.0 mW |
| Voltage for 100 dB | 24 mV | 0.24 V |
| Current for 100 dB | 2.9 mA | 16.3 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 1.06 Ω | 1.88 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
One caution before reading the rows. For Campfire Audio Solaris 2020 the maker publishes no sensitivity figure at all. The number in the table was collected when this database was first built and has never been traced to a manufacturer document, so treat every row below it as an estimate rather than a specification.
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
9 sources are low enough in output impedance for the Solaris 2020 under the one-eighth rule but not for the Andromeda 10 (FiiO KA13, FiiO K11, Schiit Vali 2+, 6 more).
37 sources stay below the audible-hiss threshold with the Solaris 2020 but cross it with the Andromeda 10 (Kiwi Ears Allegro Mini, FiiO BTR11, FiiO KA13, 34 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
The gap between these two in decibels does not change with volume — it is a property of the two headphones. What changes is the size of the numbers, and it changes fast: every 10 dB costs ten times the power. The row that matters is the one nearest the level you listen at, and for most people that is nearer the top of this table than the bottom.
The Solaris 2020 is more demanding than 66% of the 567 non-electrostatic models in this database; the Andromeda 10 than 2%. Both figures use the same measure as the rest of the site: whichever runs out first against a 2 V, 100 mW dongle, voltage or power.
| dB SPL | Andromeda 10 power | Andromeda 10 voltage | Solaris 2020 power | Solaris 2020 voltage |
|---|---|---|---|---|
| 80 | 0.7 µW | 2 mV | 0.04 mW | 24 mV |
| 85 | 2.2 µW | 4 mV | 0.13 mW | 43 mV |
| 90 | 6.9 µW | 8 mV | 0.40 mW | 77 mV |
| 95 | 0.02 mW | 14 mV | 1.3 mW | 0.14 V |
| 100 | 0.07 mW | 24 mV | 4.0 mW | 0.24 V |
| 105 | 0.22 mW | 43 mV | 13 mW | 0.43 V |
105 dB is included because forum power figures are usually quoted there or higher. It is also a level that damages hearing in minutes — how many minutes is its own calculator.
| Source | Price | Headroom, Andromeda 10 | Headroom, Solaris 2020 | Output impedance | Noise |
|---|---|---|---|---|---|
| JadeAudio JA11 | $20 | 20.6 dB | 5.5 dB | 0.5 Ω | 1.7 µV |
| FiiO KA11 | $29 | 32.7 dB | 17.6 dB | 0.7 Ω | 1.7 µV |
| FiiO BTR13 | $59 | 29.6 dB | 14.5 dB | 0.6 Ω | 1.0 µV |
Of the 280 sources here, 280 reach 100 dB on both. That is the easy axis. 35 of them also publish an output impedance low enough for both under the one-eighth rule and a noise figure that stays below the audible-hiss threshold with both — the rest either fail one of those or never printed the number at all, and 208 of them are in the second group.
The cheapest of the 35 is the JadeAudio JA11, at $20. It leaves 20.6 dB of headroom on the Andromeda 10 and 5.5 dB on the Solaris 2020, its output impedance is 0.5 Ω against a one-eighth limit of 1.06 Ω and 1.88 Ω, and its noise figure puts the hiss floor 3 dB and 23 dB below the 20 dB SPL this site treats as the point where a quiet room stops hiding it.
Cheapest that satisfies three published numbers is not the same as best, and none of it is about how either headphone sounds. To put either model against a source this page does not mention, or to change the target loudness, use the amplifier matcher.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Campfire Audio Andromeda 10 and Campfire Audio Solaris 2020. Each figure on this page is labelled on those pages with where it came from, including the ones Campfire Audio never published — what that maker publishes, counted.