The Etymotic ER4XR is 45Ω at 98.0 dB/mW; the Shure SE846 is 9Ω at 114.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Etymotic ER4XR needs 16.0 dB more than the Shure SE846 to reach the same loudness — 1.6 mW against 0.04 mW.
| Specification | Etymotic ER4XR | Shure SE846 |
|---|---|---|
| Impedance | 45 Ω | 9 Ω |
| Sensitivity | 98.0 dB/mW | 114.0 dB/mW |
| Sensitivity (voltage) | 111.5 dB/V | 134.5 dB/V |
| Power for 100 dB | 1.6 mW | 0.04 mW |
| Voltage for 100 dB | 0.27 V | 19 mV |
| Current for 100 dB | 5.9 mA | 2.1 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 5.62 Ω | 1.12 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
12 sources are low enough in output impedance for the Etymotic ER4XR under the one-eighth rule but not for the Shure SE846 (FiiO KA13, FiiO K11, Schiit Vali 2+, 9 more).
41 sources stay below the audible-hiss threshold with the Etymotic ER4XR but cross it with the Shure SE846 (Kiwi Ears Allegro Mini, FiiO BTR11, FiiO KA13, 38 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Etymotic ER4XR and Shure SE846. Every figure on this page comes from what Etymotic and Shure published, or is derived from it — what Etymotic publishes and what Shure publishes, both counted.