The Grado GS3000x is 38Ω at 99.8 dB/mW; the Grado Signature S750 is 38Ω at 115.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The GS3000x needs 15.2 dB more than the Signature S750 to reach the same loudness — 1.0 mW against 0.03 mW.
| Specification | GS3000x | Signature S750 |
|---|---|---|
| Impedance | 38 Ω | 38 Ω |
| Sensitivity | 99.8 dB/mW | 115.0 dB/mW |
| Sensitivity (voltage) | 114.0 dB/V | 129.2 dB/V |
| Power for 100 dB | 1.0 mW | 0.03 mW |
| Voltage for 100 dB | 0.20 V | 35 mV |
| Current for 100 dB | 5.2 mA | 0.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.75 Ω | 4.75 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
18 sources stay below the audible-hiss threshold with the GS3000x but cross it with the Signature S750 (FiiO BTR11, FiiO K11 R2R, Lake People G103-S Mk II, 15 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Grado GS3000x and Grado Signature S750. Every figure on this page comes from what Grado published, or is derived from it — what that maker publishes, counted.