The Simgot EA500 is 16Ω at 123.0 dB (no reference unit printed); the Simgot EM6L is 26Ω at 103.1 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The EM6L needs 19.9 dB more than the EA500 to reach the same loudness — 0.49 mW against 0.01 mW.
| Specification | EA500 | EM6L |
|---|---|---|
| Impedance | 16 Ω | 26 Ω |
| Sensitivity | 123.0 dB | 103.1 dB/mW |
| Sensitivity (voltage) | 141.0 dB/V | 119.0 dB/V |
| Power for 100 dB | 0.01 mW | 0.49 mW |
| Voltage for 100 dB | 9 mV | 0.11 V |
| Current for 100 dB | 0.6 mA | 4.3 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 2.00 Ω | 3.25 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
One caution before reading the rows. Simgot EA500 printed a decibel figure with no reference unit, so this page reads it as per milliwatt. If it is really per volt, that model needs far more than the table says. Why the two readings differ by so much.
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
66 sources stay below the audible-hiss threshold with the EM6L but cross it with the EA500 (JadeAudio JA11, Kiwi Ears Allegro Mini, FiiO KA11, 63 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Simgot EA500 and Simgot EM6L. Each figure on this page is labelled on those pages with where it came from, including the ones Simgot never published — what that maker publishes, counted.