The AKG K371 is 32Ω at 99.1 dB/mW; the Fostex T50RP MK3 is 50Ω at 92.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Fostex T50RP MK3 needs 7.1 dB more than the AKG K371 to reach the same loudness — 6.3 mW against 1.2 mW.
| Specification | AKG K371 | Fostex T50RP MK3 |
|---|---|---|
| Impedance | 32 Ω | 50 Ω |
| Sensitivity | 99.1 dB/mW | 92.0 dB/mW |
| Sensitivity (voltage) | 114.0 dB/V | 105.0 dB/V |
| Power for 100 dB | 1.2 mW | 6.3 mW |
| Voltage for 100 dB | 0.20 V | 0.56 V |
| Current for 100 dB | 6.2 mA | 11.2 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.00 Ω | 6.25 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
1 source is low enough in output impedance for the Fostex T50RP MK3 under the one-eighth rule but not for the AKG K371 (Shanling H5).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: AKG K371 and Fostex T50RP MK3. Every figure on this page comes from what AKG and Fostex published, or is derived from it — what AKG publishes and what Fostex publishes, both counted.