The Audio-Technica ATH-ADX3000 is 50Ω at 98.0 dB/mW; the Audio-Technica ATH-R70xa is 470Ω at 97.0 dB/mW. This page covers what they ask of an amplifier, not how they sound.
The ATH-R70xa needs 1.0 dB more than the ATH-ADX3000 to reach the same loudness — 2.0 mW against 1.6 mW.
| Specification | ATH-ADX3000 | ATH-R70xa |
|---|---|---|
| Impedance | 50 Ω | 470 Ω |
| Sensitivity | 98.0 dB/mW | 97.0 dB/mW |
| Sensitivity (voltage) | 111.0 dB/V | 100.3 dB/V |
| Power for 100 dB | 1.6 mW | 2.0 mW |
| Voltage for 100 dB | 0.28 V | 0.97 V |
| Current for 100 dB | 5.6 mA | 2.1 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 6.25 Ω | 58.75 Ω |
| Sources that reach 100 dB out of 280 | 280 | 275 |
5 of the 280 sources have the power for the ATH-ADX3000 but not for the ATH-R70xa — Apple USB-C dongle (EU), FiiO BTR11, Steinberg UR22C, 2 more.
32 sources are low enough in output impedance for the ATH-R70xa under the one-eighth rule but not for the ATH-ADX3000 (Zoom AMS-22, Audient EVO 4, ART HeadAmp 4 Pro, 29 more).
275 of the 280 sources here reach 100 dB on both.
The ATH-R70xa is more demanding than 98% of the 567 non-electrostatic models in this database; the ATH-ADX3000 than 71%.
| dB SPL | ATH-ADX3000 power | ATH-ADX3000 voltage | ATH-R70xa power | ATH-R70xa voltage |
|---|---|---|---|---|
| 80 | 0.02 mW | 28 mV | 0.02 mW | 97 mV |
| 85 | 0.05 mW | 50 mV | 0.06 mW | 0.17 V |
| 90 | 0.16 mW | 89 mV | 0.20 mW | 0.31 V |
| 95 | 0.50 mW | 0.16 V | 0.63 mW | 0.54 V |
| 100 | 1.6 mW | 0.28 V | 2.0 mW | 0.97 V |
| 105 | 5.0 mW | 0.50 V | 6.3 mW | 1.72 V |
| Source | Price | Headroom, ATH-ADX3000 | Headroom, ATH-R70xa | Output impedance | Noise |
|---|---|---|---|---|---|
| JadeAudio JA11 | $20 | 10.8 dB | 0.1 dB | 0.5 Ω | 1.7 µV |
| FiiO KA11 | $29 | 19.1 dB | 8.5 dB | 0.7 Ω | 1.7 µV |
| FiiO BTR13 | $59 | 16.0 dB | 5.1 dB | 0.6 Ω | 1.0 µV |
Of the 280 sources here, 275 reach 100 dB on both. 69 of them also publish an output impedance low enough for both under the one-eighth rule and a noise figure that stays below the audible-hiss threshold with both.
The cheapest of the 69 is the JadeAudio JA11, at $20. It leaves 10.8 dB of headroom on the ATH-ADX3000 and 0.1 dB on the ATH-R70xa, its output impedance is 0.5 Ω against a one-eighth limit of 6.25 Ω and 58.75 Ω, and its noise figure puts the hiss floor 24 dB and 35 dB below the 20 dB SPL this site treats as the point where a quiet room stops hiding it.
| Model | As printed | Tolerance | Standard |
|---|---|---|---|
| ATH-ADX3000 | 5 to 45,000 Hz | not printed | not printed |
| ATH-R70xa | 5 to 40,000 Hz | not printed | not printed |
Audio-Technica prints 5 to 45,000 Hz for the ATH-ADX3000 and 5 to 40,000 Hz for the ATH-R70xa.
Neither range has a tolerance printed beside it, so a wider range on one sheet is not deeper bass or more treble.
Not a measurement; maker by maker.
Both have a page of their own. In full: Audio-Technica ATH-ADX3000 and Audio-Technica ATH-R70xa. Every figure on this page comes from what Audio-Technica published, or is derived from it — what that maker publishes, counted.