The Audio-Technica ATH-R70X is 470Ω at 98.0 dB/mW; the ZMF Atrium is 300Ω at 96.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The ZMF Atrium needs 2.0 dB more than the Audio-Technica ATH-R70X to reach the same loudness — 2.5 mW against 1.6 mW.
| Specification | Audio-Technica ATH-R70X | ZMF Atrium |
|---|---|---|
| Impedance | 470 Ω | 300 Ω |
| Sensitivity | 98.0 dB/mW | 96.0 dB/mW |
| Sensitivity (voltage) | 101.3 dB/V | 101.2 dB/V |
| Power for 100 dB | 1.6 mW | 2.5 mW |
| Voltage for 100 dB | 0.86 V | 0.87 V |
| Current for 100 dB | 1.8 mA | 2.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 58.75 Ω | 37.50 Ω |
| Sources that reach 100 dB out of 280 | 277 | 277 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
13 sources are low enough in output impedance for the Audio-Technica ATH-R70X under the one-eighth rule but not for the ZMF Atrium (Audient EVO 4, ART HeadAmp 4 Pro, Focusrite Scarlett Solo 4th gen, 10 more).
277 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Audio-Technica ATH-R70X and ZMF Atrium. Every figure on this page comes from what Audio-Technica and ZMF published, or is derived from it — what Audio-Technica publishes and what ZMF publishes, both counted.