The Focal Utopia is 80Ω at 104.0 dB/mW; the Sennheiser HD 560S is 120Ω at 100.8 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Sennheiser HD 560S needs 3.2 dB more than the Focal Utopia to reach the same loudness — 0.83 mW against 0.40 mW.
| Specification | Focal Utopia | Sennheiser HD 560S |
|---|---|---|
| Impedance | 80 Ω | 120 Ω |
| Sensitivity | 104.0 dB/mW | 100.8 dB/mW |
| Sensitivity (voltage) | 115.0 dB/V | 110.0 dB/V |
| Power for 100 dB | 0.40 mW | 0.83 mW |
| Voltage for 100 dB | 0.18 V | 0.32 V |
| Current for 100 dB | 2.2 mA | 2.6 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 10.00 Ω | 15.00 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
8 sources are low enough in output impedance for the Sennheiser HD 560S under the one-eighth rule but not for the Focal Utopia (Focusrite Scarlett 4i4 4th gen, Schiit Valhalla 2, Zoom UAC-232, 5 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Focal Utopia and Sennheiser HD 560S. Every figure on this page comes from what Focal and Sennheiser published, or is derived from it — what Focal publishes and what Sennheiser publishes, both counted.