The Grado RS2x is 38Ω at 99.8 dB/mW; the Grado Signature HP100 SE is 38Ω at 117.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The RS2x needs 17.2 dB more than the Signature HP100 SE to reach the same loudness — 1.0 mW against 0.02 mW.
| Specification | RS2x | Signature HP100 SE |
|---|---|---|
| Impedance | 38 Ω | 38 Ω |
| Sensitivity | 99.8 dB/mW | 117.0 dB/mW |
| Sensitivity (voltage) | 114.0 dB/V | 131.2 dB/V |
| Power for 100 dB | 1.0 mW | 0.02 mW |
| Voltage for 100 dB | 0.20 V | 28 mV |
| Current for 100 dB | 5.2 mA | 0.7 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.75 Ω | 4.75 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
27 sources stay below the audible-hiss threshold with the RS2x but cross it with the Signature HP100 SE (Kiwi Ears Allegro Mini, FiiO BTR11, FiiO K11, 24 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Grado RS2x and Grado Signature HP100 SE. Every figure on this page comes from what Grado published, or is derived from it — what that maker publishes, counted.