The Marshall Major V is 32Ω at 111.1 dB/mW; the Marshall Monitor II ANC is 32Ω at 96.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Monitor II ANC needs 15.1 dB more than the Major V to reach the same loudness — 2.5 mW against 0.08 mW.
| Specification | Major V | Monitor II ANC |
|---|---|---|
| Impedance | 32 Ω | 32 Ω |
| Sensitivity | 111.1 dB/mW | 96.0 dB/mW |
| Sensitivity (voltage) | 126.0 dB/V | 110.9 dB/V |
| Power for 100 dB | 0.08 mW | 2.5 mW |
| Voltage for 100 dB | 50 mV | 0.28 V |
| Current for 100 dB | 1.6 mA | 8.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.00 Ω | 4.00 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
15 sources stay below the audible-hiss threshold with the Monitor II ANC but cross it with the Major V (FiiO BTR11, FiiO K11 R2R, Lake People G103-S Mk II, 12 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Marshall Major V and Marshall Monitor II ANC. Every figure on this page comes from what Marshall published, or is derived from it — what that maker publishes, counted.