The Moondrop Aria Snow Edition is 32Ω at 104.1 dB/mW; the Moondrop Armature Art 12 is 5Ω at 98.0 dB/mW. This page covers what they ask of an amplifier, not how they sound.
The Armature Art 12 needs 6.1 dB more than the Aria Snow Edition to reach the same loudness — 1.6 mW against 0.39 mW.
| Specification | Aria Snow Edition | Armature Art 12 |
|---|---|---|
| Impedance | 32 Ω | 5 Ω |
| Sensitivity | 104.1 dB/mW | 98.0 dB/mW |
| Sensitivity (voltage) | 119.0 dB/V | 121.0 dB/V |
| Power for 100 dB | 0.39 mW | 1.6 mW |
| Voltage for 100 dB | 0.11 V | 89 mV |
| Current for 100 dB | 3.5 mA | 17.8 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 4.00 Ω | 0.62 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
54 sources are low enough in output impedance for the Aria Snow Edition under the one-eighth rule but not for the Armature Art 12 (FiiO SnowSky Tiny B, FiiO KA11, FiiO KA13, 51 more).
280 of the 280 sources here reach 100 dB on both.
The Aria Snow Edition is more demanding than 36% of the 567 non-electrostatic models in this database; the Armature Art 12 than 28%.
| dB SPL | Aria Snow Edition power | Aria Snow Edition voltage | Armature Art 12 power | Armature Art 12 voltage |
|---|---|---|---|---|
| 80 | 3.9 µW | 11 mV | 0.02 mW | 9 mV |
| 85 | 0.01 mW | 20 mV | 0.05 mW | 16 mV |
| 90 | 0.04 mW | 35 mV | 0.16 mW | 28 mV |
| 95 | 0.12 mW | 63 mV | 0.50 mW | 50 mV |
| 100 | 0.39 mW | 0.11 V | 1.6 mW | 89 mV |
| 105 | 1.2 mW | 0.20 V | 5.0 mW | 0.16 V |
| Source | Price | Headroom, Aria Snow Edition | Headroom, Armature Art 12 | Output impedance | Noise |
|---|---|---|---|---|---|
| JadeAudio JA11 | $20 | 18.9 dB | 4.7 dB | 0.5 Ω | 1.7 µV |
| FiiO BTR11 | $36 | 18.9 dB | 9.5 dB | 0.5 Ω | 8.0 µV |
| FiiO BTR13 | $59 | 24.1 dB | 13.7 dB | 0.6 Ω | 1.0 µV |
Of the 280 sources here, 280 reach 100 dB on both. 39 of them also publish an output impedance low enough for both under the one-eighth rule and a noise figure that stays below the audible-hiss threshold with both.
The cheapest of the 39 is the JadeAudio JA11, at $20. It leaves 18.9 dB of headroom on the Aria Snow Edition and 4.7 dB on the Armature Art 12, its output impedance is 0.5 Ω against a one-eighth limit of 4.00 Ω and 0.62 Ω, and its noise figure puts the hiss floor 16 dB and 14 dB below the 20 dB SPL this site treats as the point where a quiet room stops hiding it.
| Model | As printed | Tolerance | Standard |
|---|---|---|---|
| Aria Snow Edition | 15Hz - 50kHz | not printed | not printed |
| 20Hz - 20kHz | not printed | not printed | |
| Armature Art 12 | 6Hz-34kHz | not printed | not printed |
| 20Hz-20kHz (IEC60318-4, -3dB) | -3 dB | IEC60318-4 |
Moondrop prints two ranges, “15Hz - 50kHz” and “20Hz - 20kHz”, for the Aria Snow Edition and two ranges, “6Hz-34kHz” and “20Hz-20kHz (IEC60318-4, -3dB)”, for the Armature Art 12.
Only one of the two is a specification. The range printed for the Armature Art 12 comes with a tolerance; the one printed for the Aria Snow Edition does not, and a range without a ±dB figure says nothing about how loud that model is at either end of it. The two cannot be compared number against number, however similar they look in the table. Of the 490 models whose maker prints a range, 58 print the tolerance.
Not a measurement; maker by maker.
Both have a page of their own. In full: Moondrop Aria Snow Edition and Moondrop Armature Art 12. Every figure on this page comes from what Moondrop published, or is derived from it — what that maker publishes, counted.