The Thieaudio Hype 10 is 18Ω at 87.6 dB/mW; the Thieaudio Monarch MKII is 36Ω at 108.0 dB (no reference unit printed). This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Hype 10 needs 20.4 dB more than the Monarch MKII to reach the same loudness — 17 mW against 0.16 mW.
| Specification | Hype 10 | Monarch MKII |
|---|---|---|
| Impedance | 18 Ω | 36 Ω |
| Sensitivity | 87.6 dB/mW | 108.0 dB |
| Sensitivity (voltage) | 105.0 dB/V | 122.4 dB/V |
| Power for 100 dB | 17 mW | 0.16 mW |
| Voltage for 100 dB | 0.56 V | 76 mV |
| Current for 100 dB | 31.1 mA | 2.1 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 2.25 Ω | 4.50 Ω |
| Sources that reach 100 dB out of 280 | 264 | 280 |
One caution before reading the rows. Thieaudio Monarch MKII printed a decibel figure with no reference unit, so this page reads it as per milliwatt. If it is really per volt, that model needs far more than the table says. Why the two readings differ by so much.
16 of the 280 sources have the power for the Monarch MKII but not for the Hype 10 — Apple USB-C dongle (US), Apple USB-C dongle (EU), JadeAudio JA11, 13 more.
2 sources stay below the audible-hiss threshold with the Hype 10 but cross it with the Monarch MKII (FiiO BTR11, Rupert Neve RNHP).
264 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Thieaudio Hype 10 and Thieaudio Monarch MKII. Each figure on this page is labelled on those pages with where it came from, including the ones Thieaudio never published — what that maker publishes, counted.