The Vision Ears Phönix Final Edition is 10Ω with a sensitivity of 114.6 dB/mW, which is 134.6 dB/V. To reach 100 dB SPL — genuinely loud, louder than most people listen — it needs 0.03 mW, or 19 mV across the drivers.
That puts it in the easy category. A phone, a laptop headphone jack or the cheapest USB dongle will drive it to painful levels. Of the 280 sources in the database, 280 have at least 10 dB of headroom and another 0 have enough. The cheapest portable source that does the job is the Apple USB-C dongle (US) at $9.
Sensitivity here is in dB per milliwatt. Why the unit matters.
Vision Ears does something unusual: it publishes 114.6 dB at @1KHz with 100 mV input (printed verbatim as '114.6 dB SPL@1KHz with 100 mV input'), an SPL at one specific drive voltage rather than per milliwatt or per volt. That is convertible — at 10Ω that voltage works out to a known power — and the 114.6 dB/mW above is the result. It is a real figure, just stated in a way nothing else in this database uses.
Vision Ears prints the impedance as 10 Ohm (at 1 kHz), not as a bare number. Everything on this page is calculated with the nominal 10Ω, and the rest of that line is quoted here rather than tidied away, because how a figure is qualified is part of the specification too.
Source: vision-ears.de. How this data was built.
| As it is labelled | As printed | Tolerance | Standard |
|---|---|---|---|
| Frequency | 10 Hz - 25 kHz | not printed | not printed |
Vision Ears prints 10 Hz - 25 kHz for the Vision Ears Phönix Final Edition, under the heading “Frequency”. Source: vision-ears.de.
The label on that row is one word: “Frequency”. Not response, not range.
No tolerance is printed with it, so “10 Hz - 25 kHz” says nothing about how loud this headphone actually is at 10 Hz.
Only what the maker printed; maker by maker.
| Level | What it is | Power | Voltage | Current |
|---|---|---|---|---|
| 85 dB SPL | quiet background listening | 0.00 mW | 3 mV | 0.3 mA |
| 95 dB SPL | normal listening | 0.01 mW | 10 mV | 1.0 mA |
| 100 dB SPL | loud listening | 0.03 mW | 19 mV | 1.9 mA |
| 105 dB SPL | very loud | 0.11 mW | 33 mV | 3.3 mA |
| 110 dB SPL | peaks on dynamic music | 0.35 mW | 59 mV | 5.9 mA |
Most people listen between 75 and 85 dB; the 100 dB row leaves room for peaks.
The 15 cheapest of the 280 sources here that reach 100 dB SPL into 10Ω with at least 10 dB of headroom and no known hiss or output-impedance problem with these headphones. All 280 sources, judged for these headphones.
| Source | Type | Price | Power into 10Ω | Headroom | Verdict |
|---|---|---|---|---|---|
| FiiO SnowSky Tiny A | USB dongle | $22 | 28 mW | +29 dB | Comfortable |
| FiiO SnowSky Tiny B | USB dongle | $22 | 43 mW | +31 dB | Comfortable |
| Tanchjim Stargate II | USB dongle | $40 | 51 mW | +32 dB | Comfortable |
| ddHiFi TC35AL | USB dongle | $46 | 66 mW | +33 dB | Comfortable |
| ddHiFi TC35Air | USB dongle | $46 | 66 mW | +33 dB | Comfortable |
| Fosi Audio N3 | Bluetooth receiver | $50 | 43 mW | +31 dB | Comfortable |
| Hidizs SD2 | USB dongle | $50 | 22 mW | +28 dB | Comfortable |
| iFi GO link | USB dongle | $59 | 22 mW | +28 dB | Comfortable |
| Kiwi Ears Allegro Pro | USB dongle | $60 | 21 mW | +28 dB | Comfortable |
| ddHiFi TC35Pro (Mountain2) | USB dongle | $66 | 20 mW | +28 dB | Comfortable |
| DUNU DTC 480 | USB dongle | $70 | 20 mW | +28 dB | Comfortable |
| EPZ TP35 Pro | USB dongle | $70 | 35 mW | +30 dB | Comfortable |
| Aiyima A2 Pro | desktop DAC/amp | $75 | 47 mW | +31 dB | Comfortable |
| ddHiFi TC35Pro (Eye2) | USB dongle | $76 | 20 mW | +28 dB | Comfortable |
| ddHiFi TC44 Pro E2 | USB dongle | $99 | 78 mW | +34 dB | Comfortable |
Hiss. At 134.6 dB/V these are sensitive enough to reveal a source's own noise floor. The noisiest source in the database, the Schiit Mjolnir 3, would put its hiss at roughly 43 dB SPL in these headphones — clearly audible in quiet passages. Check your own source.
Output impedance. At 10Ω these want a source output impedance below 1.25Ω to satisfy the one-eighth rule; 46 of the 192 sources that publish one miss it. Check yours here.
10Ω · 108.5 dB/mW · Easy
See requirements →32Ω · 117.0 dB/mW · Easy
See requirements →19Ω · 114.0 dB/mW · Easy
See requirements →38Ω · 117.0 dB/mW · Easy
See requirements →38Ω · 117.0 dB/mW · Easy
See requirements →22Ω · 114.0 dB · Easy
See requirements →Compared with its stablemates: vs EXT MK II.