On power, yes — all of them. Every one of the 69 desktop amplifiers in this database reaches 100 dB SPL on the Shure SE846, which needs 0.04 mW at its 9Ω.
Power is one of three questions and the one that goes wrong least often. The other two — whether the source’s output impedance leaves the frequency response alone, and whether you will hear its noise floor — are answered further down, separately, because a source can pass one and fail another.
The cheapest one that does reach it is the JDS Labs Atom+ (2nd gen) at $99, which delivers 281 mW into 9Ω — 38 dB of headroom over the 0.04 mW this headphone needs for 100 dB SPL.
100 dB SPL is a peak level, not a listening level. If you listen at 85 dB the same headphone needs 0.00 mW, which is 15 dB less, and the answer above changes for most of the category. The model page has the full ladder.
Under the one-eighth rule the Shure SE846 wants a source below 1.12Ω. Of the 49 desktop amplifiers here that publish an output impedance, 43 are under it and 6 are not.
The furthest over is the Bottlehead Crack (OTL kit) at 120Ω, which is 107× the ceiling. Above that threshold the source stops being a volume control and starts being part of the frequency response. The simulator shows what that looks like.
The other 20 publish nothing at all on this, so they are not on either side of that count. This site leaves them blank rather than assuming a figure.
Hiss depends on the source’s own noise floor and on how sensitive the headphone is. At 114.0 dB/mW and 9Ω, the Shure SE846 turns one microvolt of source noise into about 14 dB SPL — and the threshold where that stops being noticeable in a quiet room is around 20 dB SPL.
Of the 21 desktop amplifiers here that publish a noise figure, 9 stay below that threshold with this headphone and 12 cross it.
The worst of them is the Rupert Neve RNHP, whose published 8.03 µV works out to 33 dB SPL of hiss in these. The hiss calculator takes your own figures.
The remaining 48 publish no noise figure, so they cannot be placed on either side.
| Source | Price | Into 9Ω | Output impedance | Hiss in these | Power verdict |
|---|---|---|---|---|---|
| Schiit Magni Heresy | $99 | 1.6 W | 0.25 Ω | not published | Comfortable |
| Fosi Audio SK02 | $100 | 53 mW | not published | not published | Comfortable |
| Schiit Magni+ | $109 | 562 mW | not published | not published | Comfortable |
| Schiit Magni Unity | $119 | 1.7 W | 0.1 Ω | not published | Comfortable |
| JDS Labs Atom Amp 2 | $129 | 745 mW | 0.7 Ω | 17 dB SPL | Comfortable |
| Schiit Vali 3 | $149 | 422 mW | 0.5 Ω | not published | Comfortable |
| Topping L30 II | $149 | 2.0 W | 0.1 Ω | 4 dB SPL | Comfortable |
| PreSonus HP4 | $150 | 20 mW | not published | not published | Comfortable |
| SMSL HO100 | $160 | 1.7 W | <0.1 Ω | 17 dB SPL | Comfortable |
| xDuoo MT-604 | $169 | 562 mW | not published | not published | Comfortable |
| Little Dot MK II | $176 | 28 mW | not published | not published | Comfortable |
| iFi Zen CAN | $199 | 450 mW | not published | not published | Comfortable |
Sorted by how many of the three questions the source answers well, then by price. A blank in a column is a blank in the manufacturer’s own documentation, not a zero.
The Shure SE846 on other categories: USB dongles · Bluetooth receivers · portable players · portable amplifiers · desktop DAC/amps · audio interfaces.
The Shure SE846 page has every source in the database against this headphone, and the matcher takes your own numbers.