Bottlehead Crack (OTL kit) vs SMSL H200

Short answer

  • More power: the SMSL H200, with 2.00 W into 32 Ω; the Bottlehead Crack (OTL kit) has 271 mW. The SMSL H200 drives 2 headphones to 100 dB that the Bottlehead Crack (OTL kit) cannot (Moondrop PARA, Symphonium Titan).
  • Hiss with sensitive IEMs: cannot be compared — neither maker publishes a noise figure.
  • Output impedance: 567 headphones are left alone by the SMSL H200 under the one-eighth rule but coloured by the Bottlehead Crack (OTL kit) (64 Audio Aspire 1, 64 Audio Fourte, 64 Audio Nio, 564 more).
  • Price: the SMSL H200 costs $24 more; what that buys on these numbers is set out further down, under What the price difference buys.

Both are desktop amplifiers, $375 against $399.

The SMSL H200 reaches 100 dB on 567 of the 567 models here, the Bottlehead Crack (OTL kit) on 565.

Every published figure, next to each other

SpecificationBottlehead Crack (OTL kit)SMSL H200
Power into 32Ω271 mW2.0 W
Power into 150Ω403 mW499 mW
Power into 300Ω333 mW300 mW
Power into 600Ω227 mW150 mW
Output impedance120.0 Ω<0.1 Ω
Output noisenot publishednot published
Price$375$399
Headphones it reaches 100 dB on
out of 567
565567

Not published means the maker leaves it out, so that axis cannot be compared.

The 4.4 mm or XLR socket, rated on its own

BalancedBottlehead Crack (OTL kit)SMSL H200
Socketno separate rating4.4mm / 4-pin XLR
Power into 32Ω—5.0 W
Power into 300Ω—1.0 W
Output impedance—<0.1 Ω
Output noise—not published
Headphones it reaches 100 dB on
out of 567
—567

Only the SMSL H200 has a separate balanced rating from its maker; through it, it reaches 100 dB on 567 of the 567 models here. The Bottlehead Crack (OTL kit) may still have a balanced socket — its spec sheet simply gives no figure for one, so there is nothing to put beside it.

Where each power figure comes from

LoadBottlehead Crack (OTL kit)SMSL H200
32 ΩDerivedPublished
150 ΩDerivedDerived
300 ΩPublishedPublished
600 ΩDerivedPublished

Both makers publish a power rating. Bottlehead Crack (OTL kit) publishes at 300 Ω; SMSL H200 at 32 Ω, at 300 Ω and at 600 Ω. The other rows are worked out from those.

So the two columns are not equally firm row by row: at 32 Ω and at 600 Ω only the SMSL H200 figure is the maker’s own. On those rows the derived number is the one to doubt first.

What the labels mean.

The headphones that tell them apart

2 headphones reach 100 dB on the SMSL H200 but not on the Bottlehead Crack (OTL kit) — Moondrop PARA, Symphonium Titan.

567 headphones are left alone by the SMSL H200 under the one-eighth rule but coloured by the Bottlehead Crack (OTL kit) (64 Audio Aspire 1, 64 Audio Fourte, 64 Audio Nio, 564 more).

565 of the 567 models here reach 100 dB on both.

Headroom and hiss on 8 models, both sources

Headroom is at a 100 dB SPL peak.

The widest gap on the list is the Shure SE846: SMSL H200 has +45 dB of headroom there against +33 dB. 13 dB is about 18 times the power, which matters for peaks rather than for how loud the music sits.

The hiss columns are empty for Bottlehead Crack (OTL kit) and SMSL H200 because neither maker publishes no output noise figure.

HeadphoneImpedanceNeedsBottlehead Crack (OTL kit) headroomSMSL H200 headroomBottlehead Crack (OTL kit) hissSMSL H200 hiss
Shure SE8469 Ω0.04 mW+33 dB damping+45 dBnot publishednot published
Campfire Audio Andromeda 20209 Ω4.0 mW+13 dB damping+25 dBnot publishednot published
Audeze LCD-2 Classic70 Ω0.79 mW+26 dB damping+31 dBnot publishednot published
Beyerdynamic DT 1990 Pro (250Ω)250 Ω0.63 mW+27 dB damping+27 dBnot publishednot published
HiFiMAN HE400se25 Ω7.9 mW+14 dB damping+24 dBnot publishednot published
Audio-Technica ATH-R70X470 Ω1.6 mW+22 dB damping+21 dBnot publishednot published
Sennheiser HD 600300 Ω6.6 mW+17 dB damping+17 dBnot publishednot published
HiFiMAN Susvara60 Ω50 mW+7 dB damping+13 dBnot publishednot published

The gap in dollars, against the gap in numbers

The SMSL H200 costs $24 more than the Bottlehead Crack (OTL kit). Out of the 567 models here, that difference buys 2 more models driven to 100 dB and 567 more models left alone under the one-eighth rule.

Nothing runs the other way: there is no axis here on which the cheaper of the two does better.

Only published figures count here; blank axes are counted separately.

Both pages in full

↑