FiiO M11S vs FiiO M33 R2R

Short answer

  • More power: the FiiO M33 R2R, with 470 mW into 32 Ω; the FiiO M11S has 200 mW (balanced: 1.10 W against 670 mW). Both drive 566 of the 567 non-electrostatic headphones here to 100 dB, so on that test the difference changes nothing.
  • Quieter with sensitive IEMs: the FiiO M11S. 74 headphones stay below audible hiss on it but not on the FiiO M33 R2R (64 Audio Fourte, 64 Audio Nio, 64 Audio U12t, 71 more).
  • Output impedance: 39 headphones are left alone by the FiiO M33 R2R under the one-eighth rule but coloured by the FiiO M11S (64 Audio Aspire 1, 64 Audio Fourte, 64 Audio Ocean, 36 more).
  • Price: the FiiO M33 R2R costs $231 more; what that buys on these numbers is set out further down, under What the price difference buys.

Both are portable players, $499 against $730.

On raw power they are level: each reaches 100 dB on 566 of the 567 non-electrostatic models here.

Every published figure, next to each other

SpecificationFiiO M11SFiiO M33 R2R
Power into 32Ω200 mW470 mW
Power into 150Ω44 mW109 mW
Power into 300Ω23 mW60 mW
Power into 600Ω12 mW30 mW
Output impedance1.5 Ω0.8 Ω
Output noise1.8 µV5.5 µV
Price$499$730
Headphones it reaches 100 dB on
out of 567
566566

The 4.4 mm or XLR socket, rated on its own

BalancedFiiO M11SFiiO M33 R2R
Socket4.4mm4.4mm
Power into 32Ω670 mW1.1 W
Power into 300Ω90 mW240 mW
Output impedance2.6 Ω1.5 Ω
Output noise3.1 µV10.3 µV
Headphones it reaches 100 dB on
out of 567
566566

Through the balanced sockets the two are level on the same test: each reaches 100 dB on 566 of the 567 models here.

Everything else the two makers publish

As publishedFiiO M11SFiiO M33 R2R
DACDual ES9038Q2MFiiO proprietary R2R DAC (fully differential 24-bit R2R resistor arrays)
ProcessorQualcomm Snapdragon 660Qualcomm Snapdragon 680
Operating systemAndroid 10 (global SRC bypass)Android 13
Storage32 GB storage (about 16 GB available to user), 3 GB RAM, microSD slot up to 2 TB128 GB storage (about 112 GB usable), 8 GB RAM, memory card up to 2 TB
Outputs3.5 mm single-ended headphone out, 2.5 mm + 4.4 mm balanced, 3.5 mm line out (shared PO), 3.5 mm coaxial out (shared PO)3.5 mm headphone out, 4.4 mm balanced headphone out, 3.5 mm line out (shared PO), 4.4 mm balanced line out (shared BAL), 3.5 mm coaxial (shared PO)
BluetoothTransmit SBC/AAC/aptX/aptX HD/LDAC/LHDC (version not stated); receive Bluetooth 5.0: SBC/AAC/LDACBluetooth 5.0; transmit SBC/aptX/aptX HD/LDAC/LHDC; receive SBC/LDAC
Wi-Fi2.4 GHz / 5 GHz2.4 GHz / 5 GHz, DLNA / AirPlay / Wi-Fi music transfer
FormatsFLAC up to 384kHz/32bit; DSD64/128/256; USB audio 768kHz-32bit/DSD512Local up to 384kHz/32bit, DSD256 (Native); USB audio 768kHz/32bit, DSD512
Screen5.0-inch IPS incell, 1280 x 7205.5-inch, 1080 x 2160, fully laminated
Batterynot published4400 mAh
Battery life>14 h (3.5 mm headphone output, volume 48) / >14 h (2.5 mm + 4.4 mm balanced output, volume 37)15.5 h (3.5 mm headphone output) / 13.5 h (4.4 mm balanced output)
Weight271 g258 g
DimensionsApprox. 125.2 x 74 x 18.5 mmAbout 138.2 x 71.5 x 17 mm

Copied from the makers’ own pages: fiio.com/m11s, fiio.com/M11S_parameters, fiio.com/M33R2R_parameters, fiio.com/m33r2r. Battery life is the maker’s own test figure.

Where each power figure comes from

LoadFiiO M11SFiiO M33 R2R
32 ΩPublishedPublished
150 ΩDerivedDerived
300 ΩPublishedPublished
600 ΩDerivedDerived

Both makers publish a power rating. FiiO M11S publishes at 32 Ω and at 300 Ω; FiiO M33 R2R at 32 Ω and at 300 Ω. The other rows are worked out from those.

The two publish at the same loads, which is the one case where the rows of this table can be read straight across.

What the labels mean.

The headphones that tell them apart

On power they are interchangeable across this whole database: there is no headphone here that one reaches 100 dB on and the other does not.

39 headphones are left alone by the FiiO M33 R2R under the one-eighth rule but coloured by the FiiO M11S (64 Audio Aspire 1, 64 Audio Fourte, 64 Audio Ocean, 36 more).

74 headphones stay below the audible-hiss threshold on the FiiO M11S but cross it on the FiiO M33 R2R (64 Audio Fourte, 64 Audio Nio, 64 Audio U12t, 71 more).

566 of the 567 models here reach 100 dB on both.

Headroom and hiss on 8 models, both sources

Headroom is at a 100 dB SPL peak.

The widest gap on the list is the Sennheiser HD 600: FiiO M33 R2R has +10 dB of headroom there against +5 dB. 4 dB is about 2.6 times the power, which matters for peaks rather than for how loud the music sits.

Hiss below about 20 dB SPL is inaudible in a quiet room.

HeadphoneImpedanceNeedsFiiO M11S headroomFiiO M33 R2R headroomFiiO M11S hissFiiO M33 R2R hiss
Shure SE8469 Ω0.04 mW+36 dB damping+39 dB20 dB29 dB
Campfire Audio Andromeda 20209 Ω4.0 mW+16 dB damping+19 dB-0 dB9 dB
Audeze LCD-2 Classic70 Ω0.79 mW+21 dB+24 dB-2 dB7 dB
Beyerdynamic DT 1990 Pro (250Ω)250 Ω0.63 mW+16 dB+20 dB-7 dB3 dB
HiFiMAN HE400se25 Ω7.9 mW+15 dB+18 dB-8 dB2 dB
Audio-Technica ATH-R70X470 Ω1.6 mW+10 dB+14 dB-14 dB-4 dB
Sennheiser HD 600300 Ω6.6 mW+5 dB+10 dB-18 dB-8 dB
HiFiMAN Susvara60 Ω50 mW+3 dB+7 dB-20 dB-10 dB

The gap in dollars, against the gap in numbers

The FiiO M33 R2R costs $231 more than the FiiO M11S. Out of the 567 models here, that difference buys 39 more models left alone under the one-eighth rule.

It does not run one way only: the cheaper FiiO M11S keeps 74 models below the audible-hiss threshold that the FiiO M33 R2R does not, which is the part worth checking against your own headphones before paying the difference.

Only published figures count here; blank axes are counted separately.

Both pages in full

Each in full: FiiO M11S and FiiO M33 R2R.

↑