The Abyss AB-1266 Phi CC is 42Ω at 88.0 dB (no figure from the maker at all); the Abyss Diana MR is 30Ω at 93.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The AB-1266 Phi CC needs 5.0 dB more than the Diana MR to reach the same loudness — 16 mW against 5.0 mW.
| Specification | AB-1266 Phi CC | Diana MR |
|---|---|---|
| Impedance | 42 Ω | 30 Ω |
| Sensitivity | 88.0 dB | 93.0 dB/mW |
| Sensitivity (voltage) | 101.8 dB/V | 108.2 dB/V |
| Power for 100 dB | 16 mW | 5.0 mW |
| Voltage for 100 dB | 0.82 V | 0.39 V |
| Current for 100 dB | 19.4 mA | 12.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 5.25 Ω | 3.75 Ω |
| Sources that reach 100 dB out of 280 | 277 | 280 |
One caution before reading the rows. For Abyss AB-1266 Phi CC the maker publishes no sensitivity figure at all. The number in the table was collected when this database was first built and has never been traced to a manufacturer document, so treat every row below it as an estimate rather than a specification.
3 of the 280 sources have the power for the Diana MR but not for the AB-1266 Phi CC — Apple USB-C dongle (EU), Steinberg UR22C, Sony NW-A306.
1 source is low enough in output impedance for the AB-1266 Phi CC under the one-eighth rule but not for the Diana MR (Shanling H5).
277 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Abyss AB-1266 Phi CC and Abyss Diana MR. Each figure on this page is labelled on those pages with where it came from, including the ones Abyss never published — what that maker publishes, counted.