The Abyss AB-1266 Phi TC is 50Ω at 88.0 dB/mW; the Sony MDR-MV1 is 24Ω at 100.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Abyss AB-1266 Phi TC needs 12.0 dB more than the Sony MDR-MV1 to reach the same loudness — 16 mW against 1.0 mW.
| Specification | Abyss AB-1266 Phi TC | Sony MDR-MV1 |
|---|---|---|
| Impedance | 50 Ω | 24 Ω |
| Sensitivity | 88.0 dB/mW | 100.0 dB/mW |
| Sensitivity (voltage) | 101.0 dB/V | 116.2 dB/V |
| Power for 100 dB | 16 mW | 1.0 mW |
| Voltage for 100 dB | 0.89 V | 0.15 V |
| Current for 100 dB | 17.8 mA | 6.5 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 6.25 Ω | 3.00 Ω |
| Sources that reach 100 dB out of 280 | 275 | 280 |
5 of the 280 sources have the power for the Sony MDR-MV1 but not for the Abyss AB-1266 Phi TC — Apple USB-C dongle (EU), Zoom AMS-22, Steinberg UR22C, 2 more.
1 source is low enough in output impedance for the Abyss AB-1266 Phi TC under the one-eighth rule but not for the Sony MDR-MV1 (Shanling H5).
275 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Abyss AB-1266 Phi TC and Sony MDR-MV1. Every figure on this page comes from what Abyss and Sony published, or is derived from it — what Abyss publishes and what Sony publishes, both counted.