The Fostex T50RP MK3 is 50Ω at 92.0 dB/mW; the Meze 99 Classics is 32Ω at 103.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Fostex T50RP MK3 needs 11.0 dB more than the Meze 99 Classics to reach the same loudness — 6.3 mW against 0.50 mW.
| Specification | Fostex T50RP MK3 | Meze 99 Classics |
|---|---|---|
| Impedance | 50 Ω | 32 Ω |
| Sensitivity | 92.0 dB/mW | 103.0 dB/mW |
| Sensitivity (voltage) | 105.0 dB/V | 117.9 dB/V |
| Power for 100 dB | 6.3 mW | 0.50 mW |
| Voltage for 100 dB | 0.56 V | 0.13 V |
| Current for 100 dB | 11.2 mA | 4.0 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 6.25 Ω | 4.00 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
1 source is low enough in output impedance for the Fostex T50RP MK3 under the one-eighth rule but not for the Meze 99 Classics (Shanling H5).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Fostex T50RP MK3 and Meze 99 Classics. Every figure on this page comes from what Fostex and Meze published, or is derived from it — what Fostex publishes and what Meze publishes, both counted.