The Moondrop Armature Art 12 is 5Ω at 98.0 dB/mW; the Moondrop Meteor is 18.5Ω at 102.7 dB/mW. This page covers what they ask of an amplifier, not how they sound.
The Armature Art 12 needs 4.7 dB more than the Meteor to reach the same loudness — 1.6 mW against 0.54 mW.
| Specification | Armature Art 12 | Meteor |
|---|---|---|
| Impedance | 5 Ω | 18.5 Ω |
| Sensitivity | 98.0 dB/mW | 102.7 dB/mW |
| Sensitivity (voltage) | 121.0 dB/V | 120.0 dB/V |
| Power for 100 dB | 1.6 mW | 0.54 mW |
| Voltage for 100 dB | 89 mV | 100 mV |
| Current for 100 dB | 17.8 mA | 5.4 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 0.62 Ω | 2.31 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
54 sources are low enough in output impedance for the Meteor under the one-eighth rule but not for the Armature Art 12 (FiiO SnowSky Tiny B, FiiO KA11, FiiO KA13, 51 more).
280 of the 280 sources here reach 100 dB on both.
The Meteor is more demanding than 31% of the 567 non-electrostatic models in this database; the Armature Art 12 than 28%.
| dB SPL | Armature Art 12 power | Armature Art 12 voltage | Meteor power | Meteor voltage |
|---|---|---|---|---|
| 80 | 0.02 mW | 9 mV | 5.4 µW | 10 mV |
| 85 | 0.05 mW | 16 mV | 0.02 mW | 18 mV |
| 90 | 0.16 mW | 28 mV | 0.05 mW | 32 mV |
| 95 | 0.50 mW | 50 mV | 0.17 mW | 56 mV |
| 100 | 1.6 mW | 89 mV | 0.54 mW | 100 mV |
| 105 | 5.0 mW | 0.16 V | 1.7 mW | 0.18 V |
| Source | Price | Headroom, Armature Art 12 | Headroom, Meteor | Output impedance | Noise |
|---|---|---|---|---|---|
| JadeAudio JA11 | $20 | 4.7 dB | 15.1 dB | 0.5 Ω | 1.7 µV |
| FiiO BTR11 | $36 | 9.5 dB | 18.8 dB | 0.5 Ω | 8.0 µV |
| FiiO BTR13 | $59 | 13.7 dB | 23.2 dB | 0.6 Ω | 1.0 µV |
Of the 280 sources here, 280 reach 100 dB on both. 39 of them also publish an output impedance low enough for both under the one-eighth rule and a noise figure that stays below the audible-hiss threshold with both.
The cheapest of the 39 is the JadeAudio JA11, at $20. It leaves 4.7 dB of headroom on the Armature Art 12 and 15.1 dB on the Meteor, its output impedance is 0.5 Ω against a one-eighth limit of 0.62 Ω and 2.31 Ω, and its noise figure puts the hiss floor 14 dB and 15 dB below the 20 dB SPL this site treats as the point where a quiet room stops hiding it.
| Model | As printed | Tolerance | Standard |
|---|---|---|---|
| Armature Art 12 | 6Hz-34kHz | not printed | not printed |
| 20Hz-20kHz (IEC60318-4, -3dB) | -3 dB | IEC60318-4 | |
| Meteor | 9Hz- 35kHz | not printed | not printed |
| 20Hz - 20kHz (IEC60318-4，3dB) | 3 dB | IEC60318-4 |
Moondrop prints two ranges, “6Hz-34kHz” and “20Hz-20kHz (IEC60318-4, -3dB)”, for the Armature Art 12 and two ranges, “9Hz- 35kHz” and “20Hz - 20kHz (IEC60318-4，3dB)”, for the Meteor.
Both sheets print a tolerance, which is rare enough to be worth pointing at: only 58 of the 490 models with a printed range do. These two ranges can be set against each other, because each of them says how far down the response is allowed to be at the ends.
Not a measurement; maker by maker.
Both have a page of their own. In full: Moondrop Armature Art 12 and Moondrop Meteor. Every figure on this page comes from what Moondrop published, or is derived from it — what that maker publishes, counted.