The Tin HiFi C5 is 9Ω at 98.5 dB/mW; the Tin HiFi T2 Plus is 32Ω at 104.0 dB (no reference unit printed). This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The C5 needs 5.5 dB more than the T2 Plus to reach the same loudness — 1.4 mW against 0.40 mW.
| Specification | C5 | T2 Plus |
|---|---|---|
| Impedance | 9 Ω | 32 Ω |
| Sensitivity | 98.5 dB/mW | 104.0 dB |
| Sensitivity (voltage) | 119.0 dB/V | 118.9 dB/V |
| Power for 100 dB | 1.4 mW | 0.40 mW |
| Voltage for 100 dB | 0.11 V | 0.11 V |
| Current for 100 dB | 12.5 mA | 3.5 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 1.12 Ω | 4.00 Ω |
| Sources that reach 100 dB out of 280 | 280 | 280 |
One caution before reading the rows. Tin HiFi T2 Plus printed a decibel figure with no reference unit, so this page reads it as per milliwatt. If it is really per volt, that model needs far more than the table says. Why the two readings differ by so much.
Every source in the database that drives one of them drives the other. On power, the choice between these two changes nothing about what amplifier you need.
11 sources are low enough in output impedance for the T2 Plus under the one-eighth rule but not for the C5 (FiiO KA13, FiiO K11, Schiit Vali 2+, 8 more).
280 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Tin HiFi C5 and Tin HiFi T2 Plus. Each figure on this page is labelled on those pages with where it came from, including the ones Tin HiFi never published — what that maker publishes, counted.