The Audio-Technica ATH-R50x is 50Ω with a sensitivity of 93.3 dB/mW, which is 106.3 dB/V. To reach 100 dB SPL — genuinely loud, louder than most people listen — it needs 4.7 mW, or 0.48 V across the drivers.
That puts it in the easy category. A phone, a laptop headphone jack or the cheapest USB dongle will drive it to painful levels. Of the 280 sources in the database, 237 have at least 10 dB of headroom and another 43 have enough. The cheapest portable source that does the job is the Apple USB-C dongle (US) at $9.
Sensitivity here is in dB per milliwatt. Why the unit matters.
Audio-Technica publishes this directly as 93.3 dB/mW, per milliwatt, so nothing was converted.
The maker adds a power recommendation of its own: Maximum Input Power 1,600 mW
Source: audio-technica.com. How this data was built.
| As it is labelled | As printed | Tolerance | Standard |
|---|---|---|---|
| Frequency Response | 5 to 40,000 Hz | not printed | not printed |
Audio-Technica prints 5 to 40,000 Hz for the Audio-Technica ATH-R50x, under the heading “Frequency Response”. Source: audio-technica.com.
No tolerance is printed with it, so “5 to 40,000 Hz” says nothing about how loud this headphone actually is at 5 Hz.
Only what the maker printed; maker by maker.
| Level | What it is | Power | Voltage | Current |
|---|---|---|---|---|
| 85 dB SPL | quiet background listening | 0.15 mW | 86 mV | 1.7 mA |
| 95 dB SPL | normal listening | 1.5 mW | 0.27 V | 5.4 mA |
| 100 dB SPL | loud listening | 4.7 mW | 0.48 V | 9.7 mA |
| 105 dB SPL | very loud | 15 mW | 0.86 V | 17.2 mA |
| 110 dB SPL | peaks on dynamic music | 47 mW | 1.53 V | 30.6 mA |
Most people listen between 75 and 85 dB; the 100 dB row leaves room for peaks.
The 15 cheapest of the 280 sources here that reach 100 dB SPL into 50Ω with at least 10 dB of headroom and no known hiss or output-impedance problem with these headphones. All 280 sources, judged for these headphones.
| Source | Type | Price | Power into 50Ω | Headroom | Verdict |
|---|---|---|---|---|---|
| FiiO KA11 | USB dongle | $29 | 128 mW | +14 dB | Comfortable |
| Tanchjim Stargate II | USB dongle | $40 | 48 mW | +10 dB | Comfortable |
| ddHiFi TC35AL | USB dongle | $46 | 134 mW | +15 dB | Comfortable |
| ddHiFi TC35Air | USB dongle | $46 | 134 mW | +15 dB | Comfortable |
| Fosi Audio N3 | Bluetooth receiver | $50 | 88 mW | +13 dB | Comfortable |
| FiiO BTR13 | Bluetooth receiver | $59 | 64 mW | +11 dB | Comfortable |
| iFi GO link | USB dongle | $59 | 47 mW | +10 dB | Comfortable |
| Tempotec Sonata BHD Pro | USB dongle | $60 | 179 mW | +16 dB | Comfortable |
| iBasso DC03 Pro | USB dongle | $69 | 63 mW | +11 dB | Comfortable |
| EPZ TP35 Pro | USB dongle | $70 | 72 mW | +12 dB | Comfortable |
| Tanchjim Space | USB dongle | $70 | 80 mW | +12 dB | Comfortable |
| Truthear SHIO | USB dongle | $70 | 80 mW | +12 dB | Comfortable |
| Aiyima A2 Pro | desktop DAC/amp | $75 | 96 mW | +13 dB | Comfortable |
| Moondrop Dawn Pro | USB dongle | $75 | 80 mW | +12 dB | Comfortable |
| FiiO KA3 | USB dongle | $79 | 83 mW | +13 dB | Comfortable |
Hiss. At 106.3 dB/V these are sensitive enough to reveal a source's own noise floor. The noisiest source in the database, the Schiit Mjolnir 3, would put its hiss at roughly 14 dB SPL in these headphones — clearly audible in quiet passages. Check your own source.
Output impedance. At 50Ω these want a source output impedance below 6.25Ω to satisfy the one-eighth rule; 34 of the 192 sources that publish one miss it. Check yours here.
50Ω · 98.0 dB/mW · Easy
See requirements →48Ω · 102.0 dB/mW · Easy
See requirements →47Ω · 96.0 dB/mW · Easy
See requirements →47Ω · 93.0 dB · Easy
See requirements →23Ω · 90.0 dB/mW · Easy
See requirements →60Ω · 94.0 dB/mW · Easy
See requirements →Compared with its stablemates: vs ATH-A2000Z · vs ATH-AWKG · vs ATH-R70X · vs ATH-R70xa.