On power, yes — all of them. Every one of the 69 desktop amplifiers in this database reaches 100 dB SPL on the Beyerdynamic DT 1990 Pro (250Ω), which needs 0.63 mW at its 250Ω.
Power is one of three questions and the one that goes wrong least often. The other two — whether the source’s output impedance leaves the frequency response alone, and whether you will hear its noise floor — are answered further down, separately, because a source can pass one and fail another.
The cheapest one that does reach it is the JDS Labs Atom+ (2nd gen) at $99, which delivers 327 mW into 250Ω — 27 dB of headroom over the 0.63 mW this headphone needs for 100 dB SPL.
100 dB SPL is a peak level, not a listening level. If you listen at 85 dB the same headphone needs 0.02 mW, which is 15 dB less, and the answer above changes for most of the category. The model page has the full ladder.
Under the one-eighth rule the Beyerdynamic DT 1990 Pro (250Ω) wants a source below 31.25Ω. Of the 49 desktop amplifiers here that publish an output impedance, 47 are under it and 2 are not.
The furthest over is the Bottlehead Crack (OTL kit) at 120Ω, which is 4× the ceiling. Above that threshold the source stops being a volume control and starts being part of the frequency response. The simulator shows what that looks like.
The other 20 publish nothing at all on this, so they are not on either side of that count. This site leaves them blank rather than assuming a figure.
Hiss depends on the source’s own noise floor and on how sensitive the headphone is. At 102.0 dB/mW and 250Ω, the Beyerdynamic DT 1990 Pro (250Ω) turns one microvolt of source noise into about -12 dB SPL — and the threshold where that stops being noticeable in a quiet room is around 20 dB SPL.
Of the 21 desktop amplifiers here that publish a noise figure, 21 stay below that threshold with this headphone and 0 cross it.
The remaining 48 publish no noise figure, so they cannot be placed on either side.
| Source | Price | Into 250Ω | Output impedance | Hiss in these | Power verdict |
|---|---|---|---|---|---|
| JDS Labs Atom+ (2nd gen) | $99 | 327 mW | 0.7 Ω | -6 dB SPL | Comfortable |
| Schiit Magni Heresy | $99 | 455 mW | 0.25 Ω | not published | Comfortable |
| Fosi Audio SK02 | $100 | 24 mW | not published | not published | Comfortable |
| Schiit Magni+ | $109 | 320 mW | not published | not published | Comfortable |
| Schiit Magni Unity | $119 | 454 mW | 0.1 Ω | not published | Comfortable |
| JDS Labs Atom Amp 2 | $129 | 341 mW | 0.7 Ω | -10 dB SPL | Comfortable |
| Schiit Vali 2+ | $149 | 414 mW | 1.8 Ω | not published | Comfortable |
| Schiit Vali 3 | $149 | 414 mW | 0.5 Ω | not published | Comfortable |
| Topping L30 II | $149 | 636 mW | 0.1 Ω | -22 dB SPL | Comfortable |
| PreSonus HP4 | $150 | 31 mW | not published | not published | Comfortable |
| SMSL HO100 | $160 | 231 mW | <0.1 Ω | -10 dB SPL | Comfortable |
| xDuoo MT-604 | $169 | 256 mW | not published | not published | Comfortable |
Sorted by how many of the three questions the source answers well, then by price. A blank in a column is a blank in the manufacturer’s own documentation, not a zero.
The Beyerdynamic DT 1990 Pro (250Ω) on other categories: audio interfaces.
The Beyerdynamic DT 1990 Pro (250Ω) page has every source in the database against this headphone, and the matcher takes your own numbers.