Will an audio interface drive the Beyerdynamic DT 1990 Pro (250Ω)?

On power, yes — all of them. Every one of the 65 audio interfaces in this database reaches 100 dB SPL on the Beyerdynamic DT 1990 Pro (250Ω), which needs 0.63 mW at its 250Ω.

Power is one of three questions and the one that goes wrong least often. The other two — whether the source’s output impedance leaves the frequency response alone, and whether you will hear its noise floor — are answered further down, separately, because a source can pass one and fail another.

Whether it gets loud enough

The cheapest one that does reach it is the Zoom AMS-22 at $100, which delivers 4.0 mW into 250Ω — 8 dB of headroom over the 0.63 mW this headphone needs for 100 dB SPL.

100 dB SPL is a peak level, not a listening level. If you listen at 85 dB the same headphone needs 0.02 mW, which is 15 dB less, and the answer above changes for most of the category. The model page has the full ladder.

Whether it changes how they sound

Under the one-eighth rule the Beyerdynamic DT 1990 Pro (250Ω) wants a source below 31.25Ω. Of the 43 audio interfaces here that publish an output impedance, 29 are under it and 14 are not.

The furthest over is the Tascam US-2x2HR at 66Ω, which is 2× the ceiling. Above that threshold the source stops being a volume control and starts being part of the frequency response. The simulator shows what that looks like.

The other 22 publish nothing at all on this, so they are not on either side of that count. This site leaves them blank rather than assuming a figure.

Whether you will hear it between tracks

Hiss depends on the source’s own noise floor and on how sensitive the headphone is. At 102.0 dB/mW and 250Ω, the Beyerdynamic DT 1990 Pro (250Ω) turns one microvolt of source noise into about -12 dB SPL — and the threshold where that stops being noticeable in a quiet room is around 20 dB SPL.

The one audio interface here that publishes a noise figure stays below that threshold with this headphone.

The remaining 64 publish no noise figure, so they cannot be placed on either side.

The 12 best matches in this category

SourcePriceInto 250ΩOutput impedanceHiss in thesePower verdict
Steinberg IXO22$1196.4 mWnot publishednot publishedComfortable
IK Multimedia AXE I/O ONE$1308.0 mW<0.1 Ωnot publishedComfortable
Arturia MiniFuse 1$14928 mW10 Ωnot publishedComfortable
Arturia MiniFuse 2$14928 mW10 Ωnot publishedComfortable
PreSonus Studio 24c$14911 mWnot publishednot publishedComfortable
Universal Audio Volt 1$14923 mWnot publishednot publishedComfortable
Steinberg UR24C$19416 mWnot publishednot publishedComfortable
Audient iD4 MkII$19959 mWnot publishednot publishedComfortable
PreSonus Quantum ES 2$19913 mWnot publishednot publishedComfortable
Universal Audio Volt 2$19923 mWnot publishednot publishedComfortable
MOTU M2$21943 mWnot publishednot publishedComfortable
SSL 2 MkII$22948 mW1 Ωnot publishedComfortable

Sorted by how many of the three questions the source answers well, then by price. A blank in a column is a blank in the manufacturer’s own documentation, not a zero.

The same headphone, other kinds of source

The Beyerdynamic DT 1990 Pro (250Ω) on other categories: desktop amplifiers.

The Beyerdynamic DT 1990 Pro (250Ω) page has every source in the database against this headphone, and the matcher takes your own numbers.