The Beyerdynamic DT 900 Pro X is 48Ω at 100.0 dB/mW; the Dan Clark Audio Stealth is 23Ω at 90.0 dB/mW. This page is only about what they ask of an amplifier — not how they sound, which no specification on either sheet can tell you.
The Dan Clark Audio Stealth needs 10.0 dB more than the Beyerdynamic DT 900 Pro X to reach the same loudness — 10 mW against 1.0 mW.
| Specification | Beyerdynamic DT 900 Pro X | Dan Clark Audio Stealth |
|---|---|---|
| Impedance | 48 Ω | 23 Ω |
| Sensitivity | 100.0 dB/mW | 90.0 dB/mW |
| Sensitivity (voltage) | 113.2 dB/V | 106.4 dB/V |
| Power for 100 dB | 1.0 mW | 10 mW |
| Voltage for 100 dB | 0.22 V | 0.48 V |
| Current for 100 dB | 4.6 mA | 20.9 mA |
| Highest source impedance that leaves them alone (one-eighth rule) | 6.00 Ω | 2.88 Ω |
| Sources that reach 100 dB out of 280 | 280 | 279 |
1 of the 280 sources has the power for the Beyerdynamic DT 900 Pro X but not for the Dan Clark Audio Stealth — Steinberg UR22C.
1 source is low enough in output impedance for the Beyerdynamic DT 900 Pro X under the one-eighth rule but not for the Dan Clark Audio Stealth (Shanling H5).
279 of the 280 sources here reach 100 dB on both. That count is about power only — the output-impedance and hiss lines above are separate questions, and a source can pass this one and fail those.
Each model has a page of its own with the full source list, the hiss estimate and the provenance of every figure above: Beyerdynamic DT 900 Pro X and Dan Clark Audio Stealth. Every figure on this page comes from what Beyerdynamic and Dan Clark Audio published, or is derived from it — what Beyerdynamic publishes and what Dan Clark Audio publishes, both counted.